My shopping cart
Your cart is currently empty.Continue Shopping
America has changed.
But American ingenuity has not.
Today our distillers provide another essential for America....
In the past week or so, we are receiving a lot of questions regarding our Alcoholmeter Proof and Tralle 0-200 Kit and how or if it can be used with hand sanitizer production.
Here is the answer....
Candidly, we never thought we would be in a situation talking about hand sanitizer and we will do our best to give you an idea on how to proceed. There is isopropyl alcohol and then there is ethanol alcohol. There is a bit of a difference between reading isopropyl and ethanol alcohol. They are very close... The CDC recommends a hand sanitizer with at least 60% alcohol. And YES, our alcholmeter will do the job.
There are several recipes to make hand sanitizer out there.
The Proof and Tralle hydrometer will provide you a close reading for isopropyl alcohol but is designed for ethanol alcohol and would be a few points off because they both different measurement points for specific gravity. They are close enough but the other issue is that the hydrogen peroxide and the glycerin mixture would affect your readings by interfering with the measurement and how the hydrometer floats. However, you could combine the alcohol and distilled water to obtain a reading and then complete the estimate by determining volume and how that would affect your percentages.
So the steps you would take if you were back at square one is first try to have the alcohol and distilled water at 60F if not, use the temperature adjustment chart:
1. Use our Brewing America Alcoholmeter (Proof and Tralle) to test your alcohol to learn its proof level.
2. Add the distilled water to the alcohol.
3. Check your alcohol level with the distilled water and make a note of the readings.
4. Measure your volumes of the distilled water and alcohol.
5. Measure your volumes of the hydrogen peroxide and the glycerin or aloe Vera mixture. This will become a math problem at this point. This will decrease the alcohol levels in the end product, but you want to maintain a 60% alcohol level.
6. Note how much you cut your alcohol with your hydrogen peroxide and the glycerin or aloe Vera mixture solution.
7. Calculate your new alcohol proof based on the volume of your hydrogen peroxide and the glycerin mixture solution to alcohol volume.